Bi-Xenon HID/ Dual Beam LED H13 Anti-Flicker Decoder Resistors Adaptors


#1 CUSTOMER SERVICE & QUALITY / 2 YEAR WARRANTY
The resistors provide stable and trouble-free operation both of HIDs and LEDs. You’ll forget what flickering looks like, as well as intermittent lights work and errors on your vehicle dashboard. There’re a lot of issues and their causes differ, but we are happy to represent a universal means of efficient weeding of problems field. Improved effectiveness, easy to install and you’re ready to fight the darkness. A single solution for a number of issues!
You are definitely going to need these resistors if your vehicle has CAN-BUS system or Totally Integrated Power Module (TIMP) on board. As usual it is Dodge, RAM, Jeep, Chrysler and most of European cars of recent years.

Features:
§  Pre-wired for Plug and Play
§  Eliminate error message on dashboard
§  Prevent flickering
§  Load Resistors: 50W 6 Ohm
§  High Quality materials for maximum durability and performance
§  Fit both HID and LED lights
§  Compatible both with 35W and 55W kits.

Includes:
§  2 x H13 Load Resistor Adaptors
CAUTION: Resistors get HOT so mount them on metal.

Fit sizes:
§  9008


Taken from: https://kensun.com/products/bi_xenon_hid_led_h13_anti_flicker_decoder_resistors_adaptors

Коментарі

Дописати коментар

Популярні дописи з цього блогу

MARYLAND Headlights Law

MARYLAND 1.    Any  lighted   lamp  or illuminating device on a motor  vehicle  (other than  headlamps , spot  lamps , auxiliary  lamps , flashing front direction signals) that projects a beam of an intensity greater than 300 candlepower (3770 lumens) shall be so directed that the beam will not strike the level of the road at a distance of more than 75 feet from the vehicle . 2.    A person may not drive any  vehicle  on any highway with any  lamp  or device on it that displays a red or blue  light  visible from directly in front of its center. All  lighting devices and reflectors mounted on the rear of any  vehicle  shall display or reflect a red color, except the stoplight or other signal device, which may be red, amber, or yellow, and except that the  light  emitted by a backup  lamp  shall be white or amber. 3.    Flashing  lights  a...
Докладніше

GEORGIA HIDs/LEDs Use Laws

GEORGIA ·   In Georgia, not more than four  lights  may be  lighted  at one time on in front of a vehicle, being a  headlamp  or an auxiliary  lamp  or spot lamp, that projects a  beam  with an intensity brighter than 300 candlepower. ·   It is unlawful to operate any motor  vehicle  equipped with a device producing any blue  lights , whether flashing, blinking, revolving, or stationary. ·   It is unlawful to operate a motorcycle equipped with a device producing any blue ( LED )  lights . ·   At least one break  light  is required to drive the  vehicle  on the highway. ·   In addition to  headlights  and tail  lights , vehicles in Georgia are allowed to have additional  lighting  including at least two fog  lights  (see below). LIGHTING  LAWS IN GEORGIA NOTICE!  THIS PAGE CONTAINS ONLY A LIST OF RECOMM...
Докладніше

NEW MEXICO Headlights Law

1.    Any  lighted   lamp  or illuminating device on a  vehicle  (other than  headlamps , spot lamps , auxiliary  lamps  flashing turn signals) which projects a beam of an intensity greater than 3770 lumens shall be so directed that the beam will not strike the level of the road at a distance of more than 75 feet from the  vehicle . 2.    Flashing  lights  are prohibited, though flashing red  lights  may be used as warning lights on disabled or parked  vehicles  and on any  vehicles  as a means of indicating a turn. No  headlight  shall emit a glaring or dazzling  light . 3.    A  vehicle  shall be equipped with at least two  headlights  and not more than two fog lights . The maximum number of  lights  that can be turned on in the front of the  vehicle while driving is four.        ...
Докладніше