LED H4 (HB2) (9003) Dual Beam Conversion Kit with ETI LED Chips

SUPER BRIGHT LED H4
KENSUN SUPER BRIGHT LED H4 DUAL BEAM CONVERSION KITFEATURES PLUG-AND-PLAY INSTALLATION
#1 CUSTOMER SERVICE & QUALITY / 2 YEAR WARRANTY
Plug-and-play installation for most vehicles. No resistors, no extra wiring is required.Some vehicles may need professional installation.
1.                Penetrating brightness. No delay when powered on. No flicker.
2.                Light is emitted stably and purely.
3.                Low voltage protection, high precision constant current driver chip.
4.                Environmentally-friendly and energy-saving.
5.                Vibration resistance.
6.                No radiation.
Includes:
1.     aluminum carry-case
2.     pair of 40W 3600 Lm super-bright LED bulbs
Highly recommended: For steady operation use 20A fuse.
Note: Be advised, LED bulbs brightness fades over time. There is no light source that remains unchanged.
In case you face any difficulties with the product, inquire our troubleshooting.
Contributed from: https://kensun.com/products/led_kit_h4_super_bright_with_eti_led_chips

Коментарі

Дописати коментар

Популярні дописи з цього блогу

MARYLAND Headlights Law

MARYLAND 1.    Any  lighted   lamp  or illuminating device on a motor  vehicle  (other than  headlamps , spot  lamps , auxiliary  lamps , flashing front direction signals) that projects a beam of an intensity greater than 300 candlepower (3770 lumens) shall be so directed that the beam will not strike the level of the road at a distance of more than 75 feet from the vehicle . 2.    A person may not drive any  vehicle  on any highway with any  lamp  or device on it that displays a red or blue  light  visible from directly in front of its center. All  lighting devices and reflectors mounted on the rear of any  vehicle  shall display or reflect a red color, except the stoplight or other signal device, which may be red, amber, or yellow, and except that the  light  emitted by a backup  lamp  shall be white or amber. 3.    Flashing  lights  a...
Докладніше

GEORGIA HIDs/LEDs Use Laws

GEORGIA ·   In Georgia, not more than four  lights  may be  lighted  at one time on in front of a vehicle, being a  headlamp  or an auxiliary  lamp  or spot lamp, that projects a  beam  with an intensity brighter than 300 candlepower. ·   It is unlawful to operate any motor  vehicle  equipped with a device producing any blue  lights , whether flashing, blinking, revolving, or stationary. ·   It is unlawful to operate a motorcycle equipped with a device producing any blue ( LED )  lights . ·   At least one break  light  is required to drive the  vehicle  on the highway. ·   In addition to  headlights  and tail  lights , vehicles in Georgia are allowed to have additional  lighting  including at least two fog  lights  (see below). LIGHTING  LAWS IN GEORGIA NOTICE!  THIS PAGE CONTAINS ONLY A LIST OF RECOMM...
Докладніше

NEW MEXICO Headlights Law

1.    Any  lighted   lamp  or illuminating device on a  vehicle  (other than  headlamps , spot lamps , auxiliary  lamps  flashing turn signals) which projects a beam of an intensity greater than 3770 lumens shall be so directed that the beam will not strike the level of the road at a distance of more than 75 feet from the  vehicle . 2.    Flashing  lights  are prohibited, though flashing red  lights  may be used as warning lights on disabled or parked  vehicles  and on any  vehicles  as a means of indicating a turn. No  headlight  shall emit a glaring or dazzling  light . 3.    A  vehicle  shall be equipped with at least two  headlights  and not more than two fog lights . The maximum number of  lights  that can be turned on in the front of the  vehicle while driving is four.        ...
Докладніше